Thursday, December 2, 2021

Barndominium Shop House BM1794

black barndo

2061 SF BARNDOMINIUM WITH A LOFT AND A 2000 SQ FT SHOP

A classic 3 bedroom-3 bathroom barndominium house plan with a two story great room, an open staircase and balcony. The master bedroom on the first floor has a large master bath with a freestanding tub, custom shower and walk-in closet. The second story loft has an oversized bedroom and it’s own private bath. The eat-in kitchen has floor to ceiling built-in cabinets and access to an outdoor dining space under the large 12′ covered porch. Barndominiums are a favorite for families looking for an open floor plan, vaulted ceilings and large garage areas and shops attached to the home. This home could also be considered a shophouse aka a Shouse. The garage will accommodate an RV, boat or a few standard or oversized vehicles. The BM1794 barndominium floor plan has been a favorite of many families from sunny Florida, to northern Michigan and from the coasts of North Carolina to the Western shores or Oregon. The beauty of this plan is it can be stick-built, post frame or steel construction with metal siding and a metal roof. The house looks the same no matter what construction method you use. 

Pricing : Stock Plans $1,150

Modify this plan $1,900

Custom design: call for pricing

KEY SPECS

2061

sq ft

3

Bed

3

Baths

2

Floor

2000 sq ft

Garage

PLAN DESCRIPTION

Customized this plan in 10 days!

Our new Accelerated Custom Design program can get a first draft in your hands in as little as 10 days. 

FAQ

Total Heated Square Footage: 2061

Slab Size: 44′ by 88′

Foundation Type: slab

Optional foundations: crawl foundation

Bedrooms: 3

Full bathrooms: 3

Master Suite total square footage: 480

Bathroom Including Large Shower, Double Vanity and Freestanding Tub

Large Walk-In Closet

Bedroom 1 & 2 – Spacious Reach-in Closet

Living/Kitchen combined Square Footage: 800

Kitchen Island: 11 feet long X 4 feet wide

Pantry: walk-in corner

Living Area Ceilings: 9 ft. high, Great room -24′ ceiling

-First Floor Plan
-Second Floor Plan
-Roof Plan
-Front and Rear Elevation
-Right and Left Elevation
-First & Second Floor Electrical Plan
-First & Second Floor Plumbing Plan
-First & Second Floor HVAC Plan
-Foundation Plan
-Roof Framing Plan
-Second Floor I-Joist Plan
-Doors & Windows Schedule

All house plans on buildmax.com were designed to accommodate the local codes and requirements at the time & location the original house was designed, these may not fall directly in line with your local regulations, and it is your responsibility to follow up with your local building department to ensure compliance is accomplished. All stock, custom or modified plan purchases are final, and we cannot refund or exchange any plan after date of purchase.

In addition to the house plans you order; many jurisdictions require a site plan be drawn up that indicates where on the property the structure will be placed. For an additional fee, BuildMax may be able to assist in the design of the site plan if you provide us with the plot plan or deed descriptions. Some areas of the country require specific beam size for roof loads depending upon snowfall in the region. If your lot is not tied to a sanitary sewer system you may also need a septic design to be drawn by a licensed professional. Many areas now have area-specific energy codes that also must be followed to certain specifications. There are several free energy code calculators online that your local building department may accept. Your builder may also be able to help with this.

In some regions, there are additional steps you will need to take to insure your house plans follow local codes. Some areas of North America have extremely strict structural engineering requirements. Examples of this would be things like areas of California and the Pacific Coast that are on active fault lines and more prone to natural disasters, areas at risk for tropical storms and hurricanes such as the East coast, the Gulf coast & the Carolinas. Tornado Alley in the Midwest will most certainly have interesting structural engineering requirements set in place. Also New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, count on having to hire a state licensed structural engineer to look over and approve the designs and potentially provide additional drawings and recalculations required by your building department. Pretty much every region of the United States has some type of specific requirement due to natural elements, you may need to leave room in your budget for the purchase CAD drawings so an engineer or architect can make the appropriate changes needed. Building departments typically have a print-out they will provide you listing all the items they require to obtain a building permit.

Something else to be aware of with stock plans, they do not have a professional stamp attached. If your building department requires one, this means they will only accept a stamp from a professional that is licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for a full review and a stamp showing the plans have been approved by a state licensed architect or engineer. In addition to this, plans which are used to construct homes in the state of Nevada are required to be drawn by a licensed Nevada architect. If you are not fully aware of all the Local regulations just go down and check with your local building department, they will be able to provide you with every code requirement and specification you need for your plans to be 100% compliant with the local regulations in your area.